Journal Publications

J. McCready, M. Knofczynski, and M.W. Keller, Survivability of Composite Repairs of Piping Subjected to Flexural Loads, International Journal of Pressure Vessels and Piping (2017) accepted

D. Kafagy, S.S. Khajotia, and M.W. Keller, “Evaluation of hybrid laser-cut and cast miniature fracture specimens,” Polymer Testing (2017) accepted

M.Crall and M.W.Keller, “Targeted Self-Healing by Magnetically Guiding Microcapsules,”ACS Applied Materials & Interfaces (2017) accepted

M.Kiani, R.Forest, S.Tipton, and M.W.Keller,”Coupon specimen–based approach for the simulation of crossbore stress and strain state,” Journal of Strain Analysis in Design, Vol. 52, n. 2, p. 112-120 (2017)

M. Kiani, M.W. Keller, and S.M. Tipton, “Comparison between Nonlinear FEA and Notch Strain Analysis for Modeling Elastoplastic Stress-Strain Response in Crossbores,” International Journal of Mechanical Sciences, vol. 118 p45-54 (2016)

A.G. Barbosa, E.V. Gutierrez, M.W. Keller, J.L. Martin, R.A. Baptista, J.O. West, and J.F. Caruso, “Performance-based correlates to vertical jump height and power values,” Isokinetics and Exercise Science, Vol. 24 n2 p. 125-132 (2016)

I. Alnaser and M.W.Keller, “Comparison of coupon and full-scale determination of energy release rate for bonded composite repairs of pressure equipment,” Engineering Fracture Mechanics, vol. 146, p. 31-40 (2015)

J.F.Caruso, A.G.Barbosa, R.Perry, R.Edwards, L.Erickson, W.T.Potter ,and M.W.Keller, “b-alanine’s impact on exercise and blood lactate values incurred from repetitive supramaximal activity,” Isokinetics and Exercise Science, vol. 22, n. 4, p. 303-309 (2014)

D.J. Boday, S. Tolbert, M.W. Keller, Z. Li, J.T. Wertz, B. Muriithi, and D.A. Loy, “Nonhydrolytic formation of silica and polysilsesquioxane particles from alkoxysilane monomers with formic acid in toluene/tetrahydrafuran solutions,” Journal of Nanoparticle Research, vol. 16, p. 2313 (2014)

M.W. Keller, K. Hampton, and B. McLaury, “Self-healing of Erosion Damage in Polymer Coatings,” Wear, vol. 307, n. 1–2, p. 218–225 (2013)

T.S. Mally, A.L. Johnston, M.Chann*, R.H. Walker, and M.W. Keller, “Performance of a Carbon-Fiber/Epoxy Composite for the Underwater Repair of Pressure Equipment,” Composite Structures, vol. 100, p. 542–547 (2013)

T.J. Mitchell and M.W. Keller, “Coaxial Electrospun Encapsulation of Epoxy for use in Self-Healing Materials” Polymer International, vol. 62, n. 6, p. 860–866 (2013)

M.W. Keller, B.D. Jellison*, and T. Ellison, “Moisture effects on the thermal and creep performance of carbon fiber/epoxy composites for structural pipeline repair,” Composites Part B: Engineering, vol. 45, n. 1, p. 1173–1180 (2013)

E.J. Brandon, M. Vozoff, E.A. Kolawa, G.F. Studor, F. Lyons, M.W. Keller, B.A. Beiermann, S.R. White, N.R. Sottos, M.A. Curry, D.L. Banks, R. Brocato, L. Zhou, S. Jung, T.N. Jackson, K. Champaigne, “Structural health management technologies for inflatable/deployable structures: Integrating sensing and self-healing,” Acta Astronautica, vol. 68, n. 7–8, p. 883–903 (2011)

D.J. Boday, R.J. Stover, B. Muriithi, M.W. Keller, J.T. Wertz, K.A. DeFriend Obrey, and D.A. Loy, “Strong, Low-Density Nanocomposites by Chemical Vapor Deposition and Polymerization of Cyanoacrylates on Aminated Silica Aerogels ,” Applied Materials and Interfaces, vol. 7, n. 1, p. 1364–1369 (2009)

B.A. Beiermann, M.W. Keller, N.R. Sottos, “Self-healing flexible laminates for resealing puncture damage,” Smart Materials and Structures, vol. 18, n. 8 (2009)

J.L. Yang, M.W. Keller, J.S. Moore, S.R. White, and N.R. Sottos, “Microencapsulation of Isocyanates for Self-Healing Polymers,” Macromolecules, vol. 41, n. 24, p. 9650–9655 (2008)

M.W. Keller, S.R. White, and N.R. Sottos, “Torsion Fatigue of Self-Healing Poly(dimethyl siloxane) Elastomers,” Polymer, v.49 n. 13–14, p. 3136–3145 (2008)

M.W. Keller, S.R. White, and N.R. Sottos, “A Self-Healing Poly(dimethyl siloxane) Elastomer,” Advanced Functional Materials, vol. 17, n. 14, p. 2399–2404 (2007)

M.W. Keller and N.R. Sottos, “Mechanical Properties of Microcapsules used in a Self-Healing Polymer,” Experimental Mechanics, vol. 46, n. 6, p. 725–733 (2006)

Book Chapters

M.W. Keller, “Encapsulated-monomer approaches to Healable Polymers and their Composites, ” in Healable Polymer Systems, Royal Society of Chemistry (2013)

M.W. Keller, “Self-Healing Composites, ” Encyclopedia of Composites, 2nd Edition, Editors: L. Nicolais and A. Borzacchiello, John Wiley & Sons, Hoboken, New Jersey (2012)

M.W. Keller, “Encapsulation-Based Self-Healing Materials, ” in Frontiers of Self-healing Materials and Applications, Ed. N. Shinya. CMC Publishing Co., Tokyo (2010)

M.W. Keller, “Self-Healing Epoxies and Composites, ” in Epoxy Polymers: New Materials and Innovations, Ed. J.-P. Pascault and R.J.J. Williams. Wiley-VCH, (2010)

M.W. Keller, B.J. Blaiszik, S.R. White and N.R. Sottos, “Recent Advances in Self-Healing Materials Systems,” in Adaptive Structures: Engineering Applications, Ed. By D.J. Wagg, I.P. Bond, P. Weaver, and M. Friswell. Wiley, Sussex (2007)

H.M. Andersson, M.W. Keller, J.M. Moore, N.R. Sottos and S.R. White, “Self-Healing Polymers and Composites,” in Self Healing Materials: An Alternative Approach to 20 Centuries of Materials Science, Ed. S. van der Zwaag, Springer, Heidelberg (2007)